2000 W AST 2000

The COLOET AST FM MULTIAMPLIFIER line is a state-of-the-art heavy-duty FM high efficiency technology.
It is a broadband agile 88-108 MHz, modular design transmitter with an output power from 2.0 KW to over 10 KW.
It basically includes an MPX input and remote control via SNMP and WEB pages and TLC/TLS, but can be equipped with StereoCoder – Fully Dynamic RDS – AES/EBU optionsThe AST FM transmitter line is designed to fulfill the requests of those remote stations in need of a heavy-duty, cost-effective transmitter design.

REAR VIEW

  • Frequency Agile Broadband 88-108 MHz
  • Modular up to 10 KW
  • Overall efficiency more than 70%
  • MPX Input
  • Optional Stereocoder (L&R), AES EBU inputs
  • Optional Dynamic RDS coding embedded
  • Ultra High signal to noise ratio, extremely low distortion
  • User friendly GUI
  • Remote control via SNMP, WEB pages, TLC/TLS
TECHNICAL FEATURES:
Working bandwidth: 87,5 ÷ 108 MHz
Frequency stability: ± 1 ppm
Output power: 2000 W
Output connector: 7/16
Harmonics Attenuation: ≥ 80 dB
Frequency Deviation: ΔF ± 75 KHz … ± 100 KHz
MPX Input: Band 40 Hz … 100 KHz impedance > 2KΩ or 600Ω
Input level adjustable from -6dBu up to +6dBu
MONO Input:
(L input is the default input, it can be set by the web pages on L or R input)
40 Hz … 15 KHz impedance > 2KΩ or 600Ω
Pre-emphasis 0/50/75μs
Level from -6dBu … up to +6dBu
AUDIO AUX Input: from 21 KHz … up to 100 KHz
Input level adjustable from -6dBu up to +6dBu
L and R Inputs: Stereocoder Option.
Impedance > 2KΩ o 600Ω pre- emphasis 0/50/75 μs
Input level adjustable from -12dBu up to +12dBu
Clipper Δf: ON/OFF
AES/EBU Input: Impedance 110 ohm
Sensitivity from 0dBFs up to – 24dBFs
RDS Input:Optional dynamic RDS encoder
STEREO OUTPUT SPECIFICATIONS with L/R and MPX INPUT
Amplitude/frequency: < ± 0.15 dB (30 Hz – 15 KHz)
Total Harmonic Distortion +Noise: 0.03% @ 400Hz
AM Noise:
(MPX Input)
≤ - 60dB ref. amplitude modulation 100% of the carrier
Synchronous AM:
(MPX Input)
With f = 400 Hz and Δf ± 75 KHz
≤ - 50 dB ref. amplitude modulation 100% of the carrier.
S/N: > 70 dB (f=400 Hz with Δf ± 75 kHz)
Linear Crosstalk:
(L/R Input)
< - 55 dB (40 Hz - 15 kHz)
(Measured with Δf ± 75 kHz)"
CONTROL AND MONITORING
Local: Graphic display with push buttons
Remote: SNMP / WEB pages/ TLS-TLC
*GSM/UMTS/GPRS as option
GENERAL SPECIFICATIONS
Weight: 15 kg
Power Supply 47÷63Hz
200÷264 VAC Single Phase
Efficiency > 70%
Environmental conditions
Max altitude 4000 m a.s.l.
Working temperature range -5 ÷ 45°C
Max relative humidity 95% @ 35°C non condensing

Features and specifications subject to change without notice